What is a Dropped Kerb?
Creating off-road parking can make everyday life much easier, particularly if parking is limited on your street. However, having enough space in your front garden doesn’t automatically mean you can start driving across the pavement to reach it.
If there’s a pavement, verge or full-height kerb between the road and your property, you will usually need an approved vehicle crossing. This is commonly known as a dropped kerb.
A dropped kerb provides a properly constructed route between the road and your driveway. It protects the pavement and any services beneath it while giving vehicles safer, smoother access to the property.
At a Glance
- You normally need a dropped kerb if you drive across a pavement or verge to reach your property.
- The work requires approval from Lincolnshire County Council.
- Planning permission may also be needed in some circumstances.
- Not every location will be suitable for a vehicle crossing.
- Trees, drains, street furniture and road safety can affect an application.
- The driveway and dropped kerb should be considered together before work begins.
When Do You Need a Dropped Kerb?
You’ll usually need a dropped kerb when accessing off-road parking requires you to drive over a public pavement, footway or grass verge.
The lowered kerb is only part of the installation. The pavement itself may need strengthening so that it can withstand regular vehicle traffic without cracking, sinking or damaging pipes and cables below ground.
Driving over a normal pavement and full-height kerb isn’t a suitable shortcut, even if your vehicle manages the bump without leaving its exhaust behind. Lincolnshire County Council states that driving across a footway or verge without permission from the Highway Authority is an offence under Section 184 of the Highways Act 1980.
The council’s dropped kerb and vehicle access guidance explains the local requirements and application process.
Is a Dropped Kerb Needed if You Already Have a Driveway?
Having a surfaced area at the front of your home doesn’t necessarily mean you have an authorised vehicle entrance.
If there’s already a properly constructed dropped kerb leading to the driveway, you may not need another one. However, you might require permission to widen it if you’re enlarging the driveway or changing the position of the entrance.
Where a driveway has been created without an approved crossing, the access still needs to be addressed. The condition of the pavement, kerb and surrounding area will be considered before any work can be authorised.
StoneSet installs dropped kerbs for new and existing driveways, subject to the necessary approval.
Who Gives Permission for a Dropped Kerb in Lincolnshire?
Lincolnshire County Council is the Highway Authority responsible for approving vehicle crossings across pavements and verges in the county.
Depending on the location, you can ask the council to construct the crossing or apply to use a suitably qualified third-party contractor. The application and approval must come before construction begins. It isn’t a case of doing the work first and hoping nobody notices afterwards.
If the property is on an A, B or C road, planning permission may be required before the dropped-kerb application can proceed. Properties with unusual access arrangements, nearby junctions or other safety concerns may also require further checks.
Permission for the crossing is separate from any permission needed to turn a front garden into a driveway or alter walls, fences and gates.
Could a Dropped-Kerb Application Be Refused?
Not every section of pavement is suitable for vehicle access. The council will consider whether the proposed entrance can be used safely without creating unreasonable risks for drivers, pedestrians or other road users.
Issues that may affect an application include:
- Being too close to a junction or crossing
- Poor visibility when entering or leaving the property
- Trees close to the proposed access
- Lamp posts, signs, utility cabinets or other street furniture
- Bus stops or parking restrictions
- An access that is too narrow
- A steep difference in level between the road and property
- Pipes, cables, drains or other underground services
- Insufficient space to park fully within the property
Vehicles shouldn’t overhang the pavement once parked. There must be enough room within the property to accommodate the vehicle safely without blocking the route used by pedestrians, pushchairs and mobility aids.
Checking these points before planning the whole driveway can prevent wasted time and expense.
Should You Plan the Driveway or Dropped Kerb First?
Ideally, they should be planned together. The position and width of the vehicle crossing affect how easily you can enter, leave and park on the driveway. Meanwhile, the driveway levels, drainage and layout need to connect properly with the approved access.
Planning them separately can leave you with a smart new driveway that doesn’t line up comfortably with the crossing. Nobody wants to perform a three-point turn every morning just to get off their own property.
Considering the complete entrance from the start allows the installer to assess:
- The most practical position for vehicle access
- The available parking and turning space
- Finished driveway levels
- Drainage and surface-water management
- Gates, walls and boundary features
- The most suitable driveway surface
StoneSet offers both tarmac driveway installation and block paving driveways, allowing the surface and access to be considered as one practical project.
Can You Widen an Existing Dropped Kerb?
It may be possible to widen an existing crossing, but you will still need approval. The council will assess the proposed additional width and the effect on pedestrians, street furniture, trees and road safety.
Widening the dropped kerb can be useful when a driveway is being enlarged to accommodate an additional vehicle or when the current entrance is particularly difficult to use.
However, approval isn’t automatic. Making an entrance wider removes more pavement space from normal use and may affect roadside parking, so each application is considered on its own circumstances.
What Happens During Installation?
Once permission has been granted and the work arranged, the existing kerbs and part of the pavement are removed. The area is excavated and prepared with a suitable foundation capable of supporting regular vehicle use.
Lower kerbs are then installed to form the entrance, with transition kerbs connecting them neatly to the existing full-height kerb. The pavement crossing is reconstructed to the approved specification and tied into the driveway entrance.
Work on or beside a public highway requires the correct qualifications, insurance and safety arrangements. It shouldn’t be treated as a casual DIY job or handed to someone who happens to have a few paving tools in the back of the van.
How Long Does the Process Take?
The construction itself may be relatively straightforward, but approval and planning must be allowed for before the work can begin.
Timescales depend on the location, whether planning permission is needed, who will carry out the work and whether utilities or street furniture are affected. For this reason, the dropped-kerb application should be started early rather than left until the driveway installation date is approaching.
StoneSet can assess the entrance, explain what needs to be considered and provide a clearer installation timescale once the relevant details are known.
Conclusion
If you need to drive across a pavement or verge to reach your driveway, you will normally require an approved dropped kerb and vehicle crossing.
The application needs to be made through Lincolnshire County Council, and planning permission may also be required for certain roads or properties. Safety, visibility, parking space, street furniture and underground services can all affect whether the proposed access is suitable.
Planning the driveway and dropped kerb together helps ensure that the entrance is practical, correctly aligned and built to withstand regular vehicle use.
Planning a New Driveway or Improved Access?
StoneSet provides professional dropped-kerb, tarmac and block-paving installations across Lincolnshire and the surrounding areas.
Contact the StoneSet team to arrange a free, no-obligation quotation and discuss the most practical way to improve access to your property.
Frequently Asked Questions
Can I drive over the pavement without a dropped kerb?
You shouldn’t drive across a public pavement or verge without an approved vehicle crossing. The pavement may not be constructed to support vehicles, and unauthorised use could damage the surface or services underneath.
Do I need planning permission for a dropped kerb in Lincolnshire?
Planning permission may be required if the property is on an A, B or C road or if other planning restrictions apply. Lincolnshire County Council will require the relevant planning reference before processing applications where permission is necessary.
Can StoneSet install a dropped kerb with a new driveway?
Yes, StoneSet can install dropped kerbs for new and existing driveways, subject to the necessary approvals. Planning both elements together can help the driveway levels, layout and entrance work properly as one complete project.